Bowood Bridging Wall Unit End Panel - Plain - 290 Height - TYPE A
Width: 350mm
Depth: 18mm
Notes: To keep our prices low, we have a minimum order requirement of any 3 kitchen units.
End Panels are used to provide a door matching finish to the ends of cabinets to give the best possible finish.
Wall End Panels are produced oversize in the depth to allow them to be cut or ‘scribed’ to any uneven wall or surface.
Specification
Wall End Panel TYPE A - Suitable for all pelmet types.
Supplied oversized in depth and will generally need to be cut to suit onsite.
Colour matched to door finish.
Various sizes available depending to suit our wall unit height options.
Plain or T&G Options available depending on the kitchen style.
No fixings supplied.
Fitting Instructions
TYPE A End panels are the same size as the Wall Unit and require the Pelmet to be mitred and returned to the wall.
We recommend that the front edge of the End Panel is positioned to line up with the front face of any adjacent door or drawer front panel. End panels are provided oversized in depth and are intended to be cut or ‘scribed’ onsite and can be secured using appropriately sized screws from the inside of the kitchen unit that the panel is to be secured.
Special Notes
Measure twice, cut once!