Artino External Curved Torus Profiled Plinth - 300 x 300 x 150mm
Unit Detail
Description
Plinth or kick board as it is sometimes called, is used to fill the gap between the floor and the underside of the cabinet. Torus Plinth is supplied as a single section and is installed inline with the door edge and is not set back 50mm like standard plinth.
Specifications
Specification
1 x Curved section supplied.
150mm high but can be trimmed or scribed to suit.
Colour matched to door finish.
Various sizes available depending on range.
No fixings supplied.
Fitting Instructions
Plinth should be trimmed to length and any angles cut with a mitre saw onsite to suit your exact application. They are secured using the plinth clips supplied with the cabinet.
Special Notes
Measure twice, cut once!