Burwood (Premium Colours) Wall End Panel - Plain - HIGH - TYPE C

End Panels are used to provide a door matching finish to the ends of cabinets to give the best possible finish.

Wall End Panels are produced oversize in the depth to allow them to be cut or ‘scribed’ to any uneven wall or surface.

Specification

Wall End Panel TYPE C - Used when Tangent Pelmet is to be stopped at the end panel.

Supplied oversize in depth and will generally need to be cut to suit onsite.

Colour matched to door finish.

Various sizes available depending to suit our wall unit height options.

Plain or T&G Options available depending on the kitchen style.

No fixings supplied.

Fitting Instructions

TYPE C End panels are 60mm taller than the Wall Unit, which allows the Tangent Pelmet to stop at the end panel. This method is easier to install and arguably provides a cleaner finish.

We recommend that the front edge of the End Panel is positioned to line up with the front face of any adjacent door or drawer front panel. End panels are provided oversize in depth and are intended to be cut or ‘scribed’ onsite and can be secured using appropriately sized screws from the inside of the kitchen unit that the panel is to be secured.  

Special Notes

Measure twice, cut once!