Bewdley Bridging Wall Unit End Panel - T&G - 360 Height - TYPE B
Width: 350mm
Depth: 18mm
Notes: To keep our prices low, we have a minimum order requirement of any 3 kitchen units.
End Panels are used to provide a door matching finish to the ends of cabinets to give the best possible finish.
Wall End Panels are produced oversize in the depth to allow them to be cut or ‘scribed’ to any uneven wall or surface.
Specification
Wall End Panel TYPE B - Used when Universal Pelmet is to be stopped at the end panel.
Supplied oversize in depth and will generally need to be cut to suit onsite.
Colour matched to door finish.
Various sizes available depending to suit our wall unit height options.
Plain or T&G Options available depending on the kitchen style.
No fixings supplied.
Fitting Instructions
TYPE B End panels are 33mm taller than the Wall Unit, which allows the Universal Pelmet to stop at the end panel. This method is easier to install and arguably provides a cleaner finish.
We recommend that the front edge of the End Panel is positioned to line up with the front face of any adjacent door or drawer front panel. End panels are provided oversize in depth and are intended to be cut or ‘scribed’ onsite and can be secured using appropriately sized screws from the inside of the kitchen unit that the panel is to be secured.
Special Notes
Measure twice, cut once!